VS-6464DN - Using the Video Generator to Troubleshoot Video Problems
41
3. Set the generated video resolution (see
Section
9.2
).
4. Set the pattern for the generated video (see
Section
9.3
).
5. Verify that the projector output is as expected.
9.4.2
Testing the Output Signal Path to the Projector
Signal path: a to b; b to projector
To test the output signal path to the projector:
1. Configure Input 33 to Output 1 (see
Section
6.4
).
2. Connect Output 1 to the projector.
3. Set the generated video resolution (see
Section
9.2
).
4. Set the pattern for the generated video (see
Section
9.3
).
5. Verify that the projector output is as expected.
9.4.3
Testing the Input and Output Signal Path to the Projector
Signal path: c to e; e to f; f to b; b to projector
To test the input and output signal path to the projector:
1. Configure Input 33 to Output 33 (see
Section
6.4
).
2. Connect Output 33 to Input 1.
3. Configure Input 1 to Output 1.
4. Connect Output 1 to the projector.
5. Set the generated video resolution (see
Section
9.2
).
6. Set the pattern for the generated video (see
Section
9.3
).
7. Verify that the projector output is as expected.