Kramer Electronics Ltd.
VS-6464DN-EM
– Input / Output Card Hardware Installation Instructions
50
Input / Output Card Hardware
Installation Instructions
The
VS-6464DN-EM
input / output cards mount in one of the 16 slots on the rear of the
VS-6464DN-EM
chassis. Slots are numbered from left to right (The process for inserting
cards is the same for all cards / chassis and the figures below are for illustration purposes
only.)
An input card must only be mounted in a slot designated for input cards (slots IN 1 to 32 and
IN 33 to 64) and an output card must only be mounted in a slot designated for output cards
(slots OUT 1 to 32 and OUT 33 to 64).
Figure 17: Inserting the Card into a Slot
To install an input / output card as shown in
1. Power off the
VS-6464DN-EM
and all devices connected to it.
2. Using a Phillips screwdriver, loosen the screws at the top and bottom of the blanking