![background image](http://html.mh-extra.com/html/kramer/vs-6464dn-em/vs-6464dn-em_user-manual_2001399049.webp)
Kramer Electronics Ltd.
VS-6464DN-EM
– Troubleshooting Video and Audio Problems
47
3. Set the generated video resolution (see
Setting the Resolution of the Generated Video
4. Set the pattern for the generated video (see
Setting the Pattern of the Generated Video
5. Verify that the projector output is as expected.
Testing the Input and Output Signal Path to the Projector
Signal path: c to e; e to f; f to b; b to projector.
To test the input and output signal path to the projector:
1. Configure Input 65 to Output 65 (see
2. Connect Output 65 to Input 1.
3. Configure Input 1 to Output 1.
4. Connect Output 1 to the projector.
5. Set the generated video resolution (see
Setting the Resolution of the Generated Video
6. Set the pattern for the generated video (see
Section
10.3).
7. Verify that the projector output is as expected.
Troubleshooting Audio Problems
The test module may be used in various ways to isolate analog audio problems.
The following examples are based on the audio signal paths shown in
VS-6464DN-EM
device installed as follows:
•
64 inputs and 64 outputs.
•
The test module is configured (see
).
•
65 configured inputs and 65 configured outputs (see
Configuring the Number of Installed
).