VS-611DT – Protocol 3000
45
10.3.3.2 NET-DHCP
Functions
Permission
Transparency
Set:
NET-DHCP
Administrator
Public
Get:
NET-DHCP?
End User
Public
Description
Syntax
Set:
Set DHCP mode
#
NET-DHCP
SP
mode
CR
Get:
Get DHCP mode
#
NET-DHCP?
CR
Response
~nn@
NET-DHCP
SP
mode
CR LF
Parameters
mode
–
0
(do not use DHCP; use the IP address set by the factory or the
NET-IP
command),
1
(try to use
DHCP; if unavailable, use the IP address set by the factory or the
NET-IP
command)
Response Triggers
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
NAME
command. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available
Consult your network administrator for correct settings
K-Config Example
Enable DHCP mode, if available:
“#NET-DHCP 1”,0x0D
10.3.3.3 NET-GATE
Functions
Permission
Transparency
Set:
NET-GATE
Administrator
Public
Get:
NET-GATE?
End User
Public
Description
Syntax
Set:
Set gateway IP
#
NET-GATE
SP
ip_address
CR
Get:
Get gateway IP
#
NET-GATE?
CR
Response
~nn@
NET-GATE
SP
ip_address
CR LF
Parameters
ip_address
– Gateway IP address, in the following format:
xxx.xxx.xxx.xxx
Response Triggers
Notes
A network gateway connects the device via another network and maybe over the Internet. Be careful of
security problems. Consult your network administrator for correct settings.
K-Config Example
Set the gateway IP address to 192.168.0.1:
“#NET-GATE 192.168.000.001”,0x0D
Summary of Contents for VS-611DT
Page 1: ...USER MANUAL MODEL VS 611DT UHD 6x1 2 Auto Switcher P N 2900 300464 Rev 3 www kramerAV com...
Page 2: ......
Page 3: ......
Page 4: ......