VS-611DT – Protocol 3000
41
10.3.2 Switching/Routing Commands
Command
Description
Type
Permission
DISPLAY
Get output HPD status
Switching
End User
VID
Set/get video switch state
Switching
End User
ROUTE
Set/get layer routing
Switching
End User
10.3.2.1 DISPLAY
Functions
Permission
Transparency
Set:
-
-
-
Get
DISPLAY?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get output HPD status
#
DISPLAY?
SP
out_id
CR
Response
~nn@
DISPLAY
SP
out_id,status
CR LF
Parameters
out_id
–
1
(HDBT Out),
2
(HDMI Out)
status
– HPD status according to signal validation:
0
(signal or sink is not valid),
1
(signal or sink is
valid),
2
(sink and EDID is valid)
Response Triggers
After execution, response is sent to the com port from which the Get was received
Response is sent after every change in output HPD status ON to OFF
Response is sent after every change in output HPD status OFF to ON and ALL parameters (new EDID,
etc.) are stable and valid
Notes
K-Config Example
Get the output HPD status of HDMI Out:
“#DISPLAY? 2”,0x0D
Summary of Contents for VS-611DT
Page 1: ...USER MANUAL MODEL VS 611DT UHD 6x1 2 Auto Switcher P N 2900 300464 Rev 3 www kramerAV com...
Page 2: ......
Page 3: ......
Page 4: ......