Kramer VS-611DT, User Manual

Page: 20 / 54

VS-611DT – Operating the VS-611DT 15
To set the audio output:
1. Press and hold the Off + Input 3 buttons.
The Lock and Input 3 LEDs flash.
2. Press the Input 3 button to set ARC/de-embedding audio:

ARC audio out – Flashing LED 3

De-embedding audio out – Solid LED 3
5.9 Setting the Switching Speed
The VS-611DT supports setting normal and fast (default) switching speeds.
To set switching speed modes:
1. Disconnect device power.
2. Press and hold one of the following buttons together with the OFF button:

IN 1 button – for setting fast switching speed mode.

IN 2 button – for setting normal switching speed mode.
3. Power the device on.
The device switching speed is modified.
Switching speed can also be set using the Routing Web page (see Section 6.1 ).
5.10 Using VCOM on USB
The device’s USB port can work as a virtual COM (VCOM) port. Verify that the USB
port on the PC that connects to the
VS-611DT
is configured as a VCOM port. You
may need to install a driver to do this. Use a tool such as Hercules or K-Config to
use P3K over USB. For more information on using the commands see
Section 10 .