Kramer Electronics Ltd.
VS-88H2
–
Protocol
3000 Commands
71
Function
Description
Syntax
Parameters/Attributes
Example
LOGIN
Set protocol
permission.
The permission
system works only if
security is enabled
with the “SECUR”
command.
LOGIN allows the
user to run commands
with an End User or
Administrator
permission level.
When the permission
system is enabled,
LOGIN enables
running commands
with the User or
Administrator
permission level
When set, login must
be performed upon
each connection
It is not mandatory to
enable the permission
system in order to use
the device
In each device, some
connections allow
logging in to different
levels. Some do not
work with security at
all.
Connection may
logout after timeout.
COMMAND
#LOGIN
login_level
,
password
<CR>
FEEDBACK
~nn@LOGIN
login_level
,
password
ok
<CR><LF>
or
~nn@LOGIN
err
004
<CR><LF>
(if bad password entered)
login_level
– Level of
permissions required (User or
Admin)
password
– Predefined password
(by PASS command). Default
password is an empty string
Set the protocol permission
level to Admin (when the
password defined in the
PASS command is 33333):
#LOGIN
Admin
,
33333
<C
R>
LOGIN?
Get current protocol
permission level.
The permission
system works only if
security is enabled
with the “SECUR”
command.
For devices that
support security,
LOGIN allows the
user to run commands
with an End User or
Administrator
permission level.
In each device, some
connections allow
logging in to different
levels. Some do not
work with security at
all.
Connection may
logout after timeout.
COMMAND
#LOGIN?
<CR>
FEEDBACK
~nn@LOGIN
login_level
<CR><LF>
login_level
– Level of
permissions required (User or
Admin)
Get current protocol
permission level:
#LOGIN?
<CR>
LOGOUT
Cancel current
permission level.
Logs out from End
User or Administrator
permission levels to
Not Secure.
COMMAND
#LOGOUT
<CR>
FEEDBACK
~nn@LOGOUT
ok
<CR><LF>
#LOGOUT
<CR>
MODEL?
Get device model.
This command
identifies equipment
connected to
VS-
88H2
and notifies of
identity changes to
the connected
equipment. The Matrix
saves this data in
memory to answer
REMOTE-INFO
requests.
COMMAND
#MODEL?
<CR>
FEEDBACK
~nn@MODEL
model_name
<CR><LF>
model_name
– String of up to 19
printable ASCII chars
Get the device model:
#MODEL?
<CR>