![background image](http://html.mh-extra.com/html/kramer/vs-48h2/vs-48h2_user-manual_2001371019.webp)
Kramer Electronics Ltd.
VS-88H2
–
Operating
VS-88H2 via Front Panel Buttons
17
Operating in ARC Mode
In ARC mode you can route the audio signal of the connected output to an input that is
connected to an audio system (for example, home theater receiver).
Ensure that the acceptor on the output side has ARC capabilities (follow the manufacturer’s
instructions).
ARC (Audio Return Channel) can be set via the front panel buttons and the embedded
webpages.
You can enable the input to accept the audio output signal, by ARC-enabling the outputs on
the device via the embedded web pages (see
Switching Audio in Breakaway Mode
for further reference). You can then route the audio output to the input either via the
) or via the front panel
buttons.
The following examples show how the output 6 ARC audio signal is routed to input 3, as
illustrated in
Figure 14: ARC Audio Routing Example
To route the audio signal from the output to the input via the front panel buttons:
1. Press the
ARC
button.
The ARC button illuminates, and the device enters ARC mode.
On the front panel, an ARC enabled input button:
•
Flashes when that input is set to ARC mode.
•
Illuminates when that button is not in ARC mode (and is set to Step-in mode).