Kramer VS-48H2, User Manual, Page: 41 / 83

Kramer Electronics Ltd.
VS-88H2
–
Using Embedded Web Pages 39
Switching ARC to an Input
To switch ARC to an input:
1. In the Navigation pane, click Switching .
The Switching page appears ( Figure 18 ).
2. Select the Audio break away ( ) tab.
The Audio break away tab is displayed ( Figure 26 ):
3. Check the ARC check boxes to ARC-enable selected outputs (under the Audio Outputs
column).
EXAMPLE:
Output 2 and 4 are checked (ARC-enabled) so they can be switched as ARC signals.
Figure 28: Switching Page
– Output 2 and 4 ARC-Enabled
Make sure that the acceptor on the output side has ARC capabilities
(see
Enabling ARC Input on page 36 ).