Kramer Electronics Ltd.
VS-88H2
–
Using
Embedded Web Pages
40
Changing Device Settings and Upgrading Firmware
The Device Settings web page shows the device details, such as name, MAC address and
firmware version and also enables performing the following functions:
•
•
•
Changing Ethernet Settings
To change the Ethernet settings:
1. In the Navigation pane, click
Device Settings
.
The Device Settings page appears:
Figure 29: Device Settings Page
2. Uncheck/check the
DHCP
check box.
3. If DHCP is unchecked, change any of the parameters (IP Address, Netmask and/or
Gateway).
4. Click
Save Changes
.
•
After changing the IP number, reload the web page with the new IP address.
•
After changing the Subnet mask you need to turn the
VS-88H2
power off and then on again.
•
If DHCP is checked, reload the web page with the new IP address.