![background image](http://html.mh-extra.com/html/kramer/vs-48h2/vs-48h2_user-manual_2001371016.webp)
Kramer Electronics Ltd.
VS-88H2
–
Operating
VS-88H2 via Front Panel Buttons
14
Routing Signals
You can switch the video and the embedded audio signals together (AFV), or switch them
separately, via the following switching modes:
•
Switching Video and Audio Signal Simultaneously
•
•
Routing an Audio Input to HDMI Output
•
•
Muting/Unmuting an Output Audio Signal
•
Muting/Unmuting an Output Video Signal
•
Routing a Pattern to an Output
Switching Video and Audio Signal Simultaneously
You can select the digital audio signal to switch to the output together with the video signal.
To switch the audio and video signals together to an output:
1. Press
D-AUDIO
and
VIDEO
simultaneously.
The button illuminates and the 7-segment LED Display
shows the current IN-OUT
video status.
2. Press an OUT (MUTE) SELECTOR Button
(1 to 8).
The 7-segment display LED, under the selected output, flashes.
Press the
ALL
Button
(instead of an output button) to route the selected input to all
the outputs. All the 7-segment display LEDs flash.
3. Press an IN (PATTERN) SELECTOR Button
(1 to 8). The selected video and audio
input is switched to the selected output (or to all the outputs if
ALL
was pressed instead)
and the 7-segment display shows the current status.
4
12
2
1