VS-41HDCP - Kramer Protocol
21
10
Kramer Protocol
You can download our user-friendly
Software for Calculating Hex Codes for
Protocol 2000
” from the technical support section on our Web site at
http://www.kramerelectronics.com
.
Section 10.1
describes how to switch between Protocol 3000 and Protocol 2000.
10.2
Section
defines Protocol 3000 and
10.3
Section
By default, the
VS-41HDCP
is set to Kramer’s Protocol 3000, but it is also
compat ble with Protocol 2000.
defines Protocol 2000.
10.1
Switching Protocols
You can switch protocols either via the front panel buttons (see
Section 10.1.1
) or
by sending protocol commands (see
10.1.2
Section
10.1.1
Switching Protocols via the Front Panel Buttons
).
To switch from Protocol 3000 to Protocol 2000, press and hold the INPUT 1 and
INPUT 2 buttons for a few seconds (not as part of the switching operation).
To switch from Protocol 2000 to Protocol 3000, press and hold the INPUT 1 and
INPUT 3 buttons for a few seconds.
i
The Windows®-based Kramer control software operates with Protocol 2000.
If the
VS-41HDCP
is set to Protocol 3000, use the front panel buttons to
switch to Protocol 2000
10.1.2
Switching Protocols via Protocol Commands
To switch from Protocol 3000 to Protocol 2000, send the following command:
#P2000<CR>
To switch from Protocol 2000 to Protocol 3000, send the following command:
0x38, 0x80, 0x83, 0x81