Step 1: Check what’s in the box
VS-41HDCP Quick Start Guide
Step 2: Install the VS-41HDCP
Step 3: Connect the inputs and output
Mount the machine in a rack (using the RK-1 rack adapter) or place on a table.
This page guides you through a basic installation and first-time use of your
.
For more detailed information, see
VS-41HDCP
the
user manual. You can download the latest
manual at
.
VS-41HDCP
http://www.kramerelectronics.com
Save he original box and packaging materials in case your Kramer product needs to be returned to the
factory for service.
Always switch off the power on each device before connecting it to your
.
VS-41HDCP
For best results, we recommend that you always use Kramer high-performance cables to connect AV
equipment to the
.
VS-41HDCP
The
4x1 DVI Switcher
1 power adapter (5V DC)
VS-41HDCP
RC-IR3 IR remote control transmitter with batteries and user manual
4 rubber feet
1 Quick start sheet
1 User Manual
Step 4: Connect the power
Connect the 5V DC power adapter to the
and plug the adapter into the mains
electricity.
VS-41HDCP
Switch on the power to each device.
1. Connect the power supply.
2. Connect the new output display.
3. Press the EDID button.
4. Wait for the input buttons to stop blinking in sequence.
To acquire the default EDID, skip step 2 above.
Step 5: Operate the VS-41HDCP
Operate the
also via the RS-232, remote control contact closure and IR remote
control.
VS-41HDCP
Computer
Graphics
Source (PC)
Display
PC Control
Device
Acquire the EDID:
Operate via the front panel buttons: