![background image](http://html.mh-extra.com/html/kramer/vs-41hdcp/vs-41hdcp_user-manual_2002327009.webp)
6
VS-41HDCP - Connecting a VS-41HDCP 4x1 DVI Switcher
5
Connecting a VS-41HDCP 4x1 DVI Switcher
i
Always switch off the power to each device before connecting it to your
VS-41HDCP
. After connecting your
VS-41HDCP
, connect its power and
then switch on the power to each device.
To connect the
VS-41HDCP 4x1 DVI Switcher
(as illustrated in
Figure 3
), do the
following:
1. Connect up to four computer graphics sources to the inputs (1 to 4).
You do not have to connect all the DVI sources.
2. Connect the OUTPUT DVI connector to a DVI acceptor (for example, a
display).
3. If required, connect a PC and/or controller to the RS-232 port and/or the
ETHERNET port (see
Section
6.3
4. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
).
Figure 3
).
5. If required, acquire the EDID (see
Section 6.1
Press an INPUT SELECTOR button (from 1 to 4) to choose which DVI input to
route to the output.
).