Kramer VS-41HDCP, User Manual, Page: 8 / 30

VS-41HDCP - Defining the VS-41HDCP 4x1 DVI Switcher 5
4 Defining the VS-41HDCP 4x1 DVI Switcher
Figure 1: VS-41HDCP 4x1 DVI Switcher Front Panel
# Feature Function
1 IR Receiver The yellow LED lights when receiving signals from the Infrared
remote control transmitter
2 ON LED Lights when receiving power
3 MUTE Button Press to toggle disconnecting the output
4 INPUT SELECTOR Buttons Press an INPUT button to select that input (from 1 to 4)
5 EDID Button Press to acquire the EDID. This button illuminates when
configuring the EDID
6 PANEL LOCK Button Press to toggle disengaging the front panel buttons
Figure 2: VS-41HDCP 4x1 DVI Switcher Rear Panel
# Feature Function
1 INPUT DVI Connectors Connect to the DVI sources (from 1 to 4)
2 REMOTE Terminal Block
Connectors
Connect to a contact closure switch (see Sec ion 6.1
3
)
OUTPUT DVI Connector Connect to the DVI acceptor
4 RS-232 9-pin D-sub Port Connects to the PC or the RS-232 Remote Controller
5 SETUP/PROG USB Connector Connect to a computer for firmware upgrade
6 PROG. Button Push in for “Program” to upgrade to the latest Kramer
firmware (see Section 7
7
), or release for Normal ( he
factory default)
ETHERNET Connector Connects to the PC or other Ethernet Controller
8 5V DC +5V DC connector for powering the unit