KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your Balanced Stereo Audio Matrix Switcher
6
The keypad selector buttons (illustrated in
Figure 2
and
Table 2
) are used to
select the outputs and the inputs when routing
1
. Use the
keypad button to
shift the display content to the left, and the
keypad button to shift the
display content to the right (as the LCD display is only large enough to show
13 cross-points out of a total of 32). Most keypad buttons have more than one
function, as defined in
Table 2
.
Table 2: VS-3232A Keypad Selector Buttons Functions
Keypad #
Function
1
4
7
5
8
6
9
0
2
3
Figure 2: VS-3232A Keypad
Selector Buttons
1
ALL
2
– Press
ALL
followed by an input number to
connect that input to all the outputs
LEFT
– Press to select the left channel of a selected
input or output
3
2
L+R
(Left and Right) – Press to select both left and
right channels of a selected input or output
3
OFF
2
– Press OFF followed by an output number
to disconnect that output
RIGHT
– Press to select the right channel of a
selected input or output
4
STO
2
– Press to store the current setting in the non-
volatile memory
6
RCL
2
– Press to recall a setup from the
non-volatile memory
7
LEVEL UP
– Press to increase the audio output
level of the selected input or output
4
9
LEVEL DOWN
– Press to decrease the audio level
of the selected input or output
4
(Backward)
ESC
– Press to exit the current operation
(Forward)
ENT
– Press to complete the input-output setup
when using a one-digit number instead of two digits
5
Press to enter the options in a setup menu
Figure 3
and
Table 3
define the rear panel of the
VS-3232A
.
1 See
Section 8.4
2 This button is enabled and illuminated after pressing the MENU button
3 For audio level adjustment
4 You can adjust the left, right or both channels of an input or an output
5 For example, to enter input 5, you can either press 0, 5 or 5, ENT
