Operating Your Video Matrix Switcher
31
31
8.4.1 Switching one Input to one Output
To switch one input to one output (in the At Once mode):
1. Press the appropriate digit buttons (for example, 06 representing output 6).
The LCD display shows the following on the right side:
In_ _ =>
Out 06
The left-hand side of the display shows a segment of the input-output
display, automatically shifting the content to show the 06 output.
2. Press the appropriate input number (for example, 27 representing input 27):
When in the At Once mode, the switching takes place immediately and
the LCD display shows a segment of the input-output status, including
the switched input and output (for example 06-27)
When in the Confirm mode, the LCD display shows the following:
In 27 =>
Out 06
Press the blinking TAKE button to switch the input to the output
8.4.2 Switching Several Inputs to Several Outputs
In the At Once mode, the
VS-3232A
will execute each OUT-IN combination
separately (see
Section 8.4.1
). If you want to switch several inputs to several
outputs simultaneously, it is necessary to operate the machine in the Confirm
mode.
In the Confirm mode you can key-in several actions and then confirm them by
pressing the TAKE button once (simultaneously switching several inputs to
several outputs).
To simultaneously switch several inputs to several outputs in the Confirm
mode (the TAKE LED is illuminated), do the following:
1. Press the appropriate digit buttons for an out-in combination.
The TAKE button blinks.
Key-in additional output-input combinations.
The LCD display can show up to five keyed-in actions, as follows
1
:
09 =>
06 05 => 07
2. After completing the output-input switching sequence, press the blinking
TAKE button to carry out the switching operation.
The inputs switch to the respective outputs, as shown on the LCD display
and the TAKE LED no longer blinks and remains illuminated.
1 In this example, input 9 is set to switch to output 06 and input 5 is set to switch to output 7
