MENU Commands Sequence
KRAMER ELECTRONICS, LTD.
52
8.11
Choosing the AUTO STORE Current SETUP
Choose whether or not to save the current setup automatically, that is,
whether to save the machine’s status on power down, so that it returns to the
same status after cycling power.
To save the current setup automatically (when set OFF), do the following:
1. Press the MENU button until you reach the AUTO Store Current SETUP
command.
The MATRIX Display shows the message:
AUTO store current SETUP
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The Displays show the messages:
OUTkey 1: no AutoSave
2: AutoSave CURRENT setup
current:
NO save
3. Press the
OUT
button
2
.
The TAKE LED blinks and the Displays show the messages:
Auto store CURRENT setup ?
Press TAKE to execute
Current:
NO save
4. Press the
TAKE
button again.
The Displays show the messages:
AUTOSAVE mode
changed
Current:
AutoSave
8.12
Identifying the MACHINE
Display essential information (the product name and version number) to
identify your machine, for example, for technical support purposes.
To identify your machine, do the following:
1. Press the MENU button until you reach the Identifying the MACHINE
command.
The MATRIX Display shows the message:
identify MACHINE
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The MATRIX Display (as Figure 23 illustrates) shows the message:
