Installing the Video Matrix Switcher
17
6.5 Dipswitch Settings
Configure the
VS-1616V
by setting the 8 dipswitches as Figure 12 and Table
6 define:
Figure 12: Rear Panel Dipswitches
Table 6: Dipswitch Definitions
Dipswitch #
Function:
1-4
Set the MACHINE # (see Table 7 in section 6.5.1)
5
Enables (ON) or disables (OFF) the
Follow-SYSTEM
mode
6
Enables (ON) or disables (OFF) the
SLAVE
mode
in a multi-channel configuration
7
Disables use of a null modem adapter
1
with RS-232
OFF = RS-232 connection via a null modem adapter
ON = RS-232 connection without a null modem adapter
8
RS-485 termination for first and last machine = ON (RS-485 line terminates with
110 ); for others = OFF (RS-485 line is open)
6.5.1
Setting the MACHINE #
To control a unit via RS-232 or RS-485, each unit has to be identified via its
unique MACHINE #. In an extended matrix configuration, in addition to the
MACHINE #, each unit is identified via its MACHINE ADDRESS #.
Set the MACHINE #
2
on a
VS-1616V
unit according to Table 7.
A valid MACHINE # is from 1 to 15.
1 See section 6.6.1
2 When using a single unit, set the unit to MACHINE # 1
