MENU Commands Sequence
KRAMER ELECTRONICS, LTD.
44
OUTkey 1: Stand-Alone UNIT
2: Large Matrix
Current
Matrix
1
3. Press the
OUT
button
#
1.
The Displays show the messages:
STAND ALONE UNIT (Mach# 01)?
Press TAKE to confirm
Current
Matrix
4. Press the
TAKE
button again.
The MATRIX Display shows the message:
MACHINE ADDRESS changed
now STAND-ALONE
8.4.3
Changing the MACHINE ADDRESS from a large matrix setting to a
large matrix setting with a different MACHINE ADDRESS
To set the MACHINE ADDRESS:
1. Press the MENU button until you reach the MACHINE ADDRESS
command.
The MATRIX Display shows the message:
MACHINE ADDRESS setting
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The Displays show the messages:
OUTkey 1: Stand-Alone UNIT
2: Large Matrix
Current
Matrix
3. Press the
OUT
button
#
2
.
The Displays show the messages:
set NEW matrix
new -> TAKE leave old -> MENU
current:
16x32
4. Press the
TAKE
button again.
The Displays show the messages:
READY to set MACHINE ADDRESS
use OUTkey 1-9, 0
current #
1
5. Press an
OUT
button
#
1-9, 0
.
The STATUS Display shows the message:
1 Indicating that the machine is not set to stand alone
