MENU Commands Sequence
KRAMER ELECTRONICS, LTD.
48
4. Press the
TAKE
button.
The Displays show the messages:
SWITCHING METHOD
changed
current:
From In #1
8.6 Choosing the extended Keyboard Setting
Section 6.8 describes how to connect a remote unit. Activate or deactivate it
by setting the extended Keyboard setting ON or OFF.
To set the extended KEYBOARD mode, do the following:
1. Press the MENU button until reaching the extended Keyboard setting.
The MATRIX Display shows the message:
extended KEYBOARD setting
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The Displays show the messages:
Outkey 1: External keys OFF
2: External keys ON
current:
X-key ON
1
3. Press the
OUT
button
1
to deactivate the External keys.
The TAKE LED blinks and the Displays show the messages:
Turn OFF external keys?
Press TAKE to execute
current:
X-key ON
4. Press the
TAKE
button.
The Displays show the messages:
External Keyboard mode
changed
current:
X-key OFF
8.7 Setting the STORE/RECALL KEYBOARD Mode
Choose one of these STORE/RECALL KEYBOARD modes:
At ONCE mode in which setups are stored/recalled immediately without
the need for user confirmation
CONFIRM mode in which storing/recalling setups require user
confirmation. The CONFIRM mode is the default
2
for storing/recalling setups
and is recommended to prevent erroneously storing/recalling of setups
1 Indicating that the external keys are currently activated
2 The AT ONCE mode is the default for all actions except storing/recalling setups