MENU Commands Sequence
KRAMER ELECTRONICS, LTD.
40
3. Press the
TAKE
button again.
The MATRIX Display momentarily shows this message, followed by the
status of the switcher and in the STATUS Display the letter “S” is
displayed behind the blinking cursor:
the UNIT is set in mode
FOLLOW system
If the status of the
VS-1616V
unit differs from that of the other unit(s), set
the
VS-1616V
unit to the
Follow-SYSTEM
mode. The MATRIX Display
blinks the new status of the switcher and the TAKE LED blinks. Pressing
the
TAKE
button
1
implements all the changes to the same state as the rest
of the system placing the switcher in the
Follow-SYSTEM
mode.
To set the
VS-1616V
unit to function in the
Breakaway-from-SYSTEM
mode:
1. Press the MENU button twice.
The MATRIX Display shows the message:
FOLLOW the system
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The Displays show the messages:
BREAKAWAY from system?
Press TAKE to execute
current:
follow SYS
3. Press the
TAKE
button again.
The MATRIX Display shows the message:
the UNIT is set in mode
BREAKAWAY from system
8.3 Choosing the Video Format Setting
Choose a VIDEO FORMAT setting from a choice of 4 settings: CV, YC,
YUV and RGBS.
WARNING
–
changing the VIDEO FORMAT resets all the OUTs/INs
connections.
To choose the VIDEO FORMAT setting:
1. Press the MENU button until you reach the VIDEO FORMAT setting
command.
The MATRIX Display shows the message:
1 Pressing a different button cancels the operation and the switcher will remain in its previous state
