Kramer VS-1616V, User Manual

Page: 19 / 65

Installing the Video Matrix Switcher
KRAMER ELECTRONICS, LTD.
14
3.
Set DIP 6 OFF
on each of the 4
VS-1616V
units.
4. Using T-connectors, connect INPUTS 1 to 16 on the
VS-1616V
unit
designated as MACHINE ADDRESS # 2 with INPUTS 1 to 16 on the
VS-1616V
unit designated as MACHINE ADDRESS # 1. Terminate the
INPUTS on MACHINE ADDRESS # 2 to 75 (push in the TERM
button
1
next to the INPUT BNCs) and put the inputs in MACHINE
ADDRESS # 1 into Hi-Z state (release the TERM buttons next to the
INPUT BNCs).
INPUTS 1 to 16 become the SYSTEM INPUTS 1 to 16.
5. Using T-connectors, connect INPUTS 17 to 32 on the
VS-1616V
unit
designated as MACHINE ADDRESS # 8 with INPUTS 17 to 32 on the
VS-1616V
unit designated as MACHINE ADDRESS # 7. Terminate the
INPUTS on MACHINE ADDRESS # 8 to 75 (push in the TERM
button next to the INPUT BNCs) and put the inputs in MACHINE
ADDRESS # 7 into Hi-Z state (release the TERM buttons next to the
INPUT BNCs).
INPUTS 17 to 32 become the SYSTEM INPUTS 17 to 32.
6. Using T-connectors, connect OUTPUTS 1 to 16 on the
VS-1616V
unit
designated as MACHINE ADDRESS # 7 with OUTPUTS 1 to 16 on the
VS-1616V
unit designated as MACHINE ADDRESS # 1.
OUTPUTS 1 to 16 become the SYSTEM OUTPUTS 1 to 16.
7. Using T-connectors, connect OUTPUTS 17 to 32 on the
VS-1616V
unit
designated as MACHINE ADDRESS # 8 with OUTPUTS 17 to 32 on the
VS-1616V unit designated as MACHINE ADDRESS # 2.
OUTPUTS 17 to 32 become the SYSTEM OUTPUTS 17 to 32.
The 4 VS-1616V units form a 32x32 switcher.
1 Item 10 on the rear panel in Figure 2