![background image](http://html.mh-extra.com/html/kramer/vs-1616d-md/vs-1616d-md_user-manual_2001299048.webp)
VS-1616D-MD - Using the Configuration Menus
43
Parameter
Description
Default
Volume
Sets the audio output volume (0
–70)
50
Audio Balance
Sets the audio output channel balance (0
–100)
50
Audio Bass
Sets the audio output bass level (0
–15)
7
Audio Treble
Sets the audio output treble level (0
–15)
7
Audio Mute
MUTE: Mutes the audio input.
Non-MUTE: Unmutes the audio input
Non-
MUTE
Audio Select
AUTO: If a plug is inserted into the 3.5mm mini jack, analog audio is
selected. If no plug is inserted, digital audio is selected.
AUD-Digital: Digital audio is selected.
AUD-Analog: Analog audio from the 3.5mm mini jack is selected.
Note
: This parameter is not displayed when the ST parameter is set
to either 1 or 2
AUTO
ST
Selects the manner in which the analog audio port functions.
ST=0: Input. If an analog source is connected, the port acts as an
input and embeds the audio into the HDMI signal that goes to the
matrix.
ST=1: Output. The audio is de-embedded from the HDMI source and
is output as analog audio. (
Note
: The 3.5mm mini jack connector
acts as an output in this case!)
ST=2: ARC. The audio is taken from the 3.5mm mini jack connector
and sent to the ARC device which is connected to the HDMI input
0
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS
Note
: Analog audio is still transmitted when HDCP is disabled
0
Reset Input
Re-power: Power cycles the port.
Factory: Performs a factory reset to default values of the port
Re-power
HDMI plus S/PDIF Audio Input Card
Parameter
Description
Default
Reset Input
Re-power: Power cycles the port.
Factory: Performs a factory reset to default values of the port
Re-power
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS
0
Audio Select
Auto: Audio signal selection is controlled by the presence or
absence of a plug in the 3.5mm mini jack.
AUD-Embedded: HDMI audio is selected.
AUD-Ex-Digital: S/PDIF audio is selected (only works on HDMI plus
S/PDIF card)
Auto