Kramer VS-1616D-MD, User Manual

Page: 46 / 103

VS-1616D-MD - Using the Configuration Menus 41
Analog Audio plus Digital Audio Input Card
Parameter Description Default
Pattern RGB Bar, Black RGB Bar
Reset Input Re-power: Power cycles the port.
Factory Reset: Performs a factory reset of the port to default
values Re-power
Audio Select Auto.
AUD-Digital: Digital audio is selected.
AUD-Analog: Analog audio from the 3.5mm mini jack is selected Auto
Audio Mute MUTE: Mutes the audio input.
Non-MUTE: Unmutes the audio input.
Note : When set to Mute, any change to the audio parameters
automatically sets this to unmute.
Note : Not applicable when digital audio is selected
Non-
MUTE
Volume Sets the audio output volume (0
–70).
Note : Not applicable when digital audio is selected
50
Audio Balance Sets the audio output channel balance (0
–100).
Note : Not applicable when digital audio is selected. Applies to
analog inputs and outputs only
50
Audio Bass Sets the audio output bass level (0
–15).
Note : Not applicable when digital audio is selected
7
Audio Treble Sets the audio output treble level (0
–15).
Note : Not applicable when digital audio is selected
7
DGKat plus RS-232 Input Card
Parameter Description Default
HDCP Turn HDCP on and off
*0=EN, 1=DIS 0
DisplayPort plus Analog Audio Input Card
Parameter Description Default
Reset Input Re-power
—Power cycles the port.
Factory default
—Performs a factory reset to default values of the
port
Re-power
HDCP Turn HDCP on and off .
*0=EN, 1=DIS 0
Audio Select Auto
—Audio signal selection is controlled by the presence or
absence of a plug in the 3.5mm mini jack.
AUD-Embedded
—HDMI audio is selected.
AUD-Analog
—Analog audio is selected
Auto
Audio Mute MUTE: mutes the audio input.
Non-MUTE: unmutes the audio input Non-
MUTE
Volume Sets the audio output volume (0
–70)
50
Audio Balance Sets the audio output channel balance (0
–100)
50
Audio Bass Sets the audio output bass level (0
–15)
7
Audio Treble Sets the audio output treble level (0
–15)
7