26
VS-1616D-MD - Operating Your Video Matrix Switcher
7.3
Confirming Actions
You can choose to work in the At Once (default) or the Confirm mode.
For all actions except storing/recalling.
In the At Once mode:
The TAKE button does not light
Pressing an
OUT-IN combination implements the switch without further user
confirmation
You save time as execution is immediate and actions require no user
confirmation
No protection is offered to correct an erroneous action
In the Confirm mode:
The TAKE button lights
You enter an action and then confirm it by pressing the TAKE button
Every action requires user confirmation, protecting against erroneous
actions
Execution is postponed until you confirm the action
Failure to press the TAKE button within a few seconds results in the action timing out
automatically
7.3.1
Switching between the At Once and Confirm Modes
To switching between the At Once and Confirm modes:
Note:
If the TAKE button is flashing you cannot switch between the At Once and
Confirm modes. A flashing TAKE button indicates that an action is currently
pending confirmation.
1. Press TAKE to switch between the At Once mode and the Confirm mode.
The TAKE button lights and actions now require user confirmation.