Kramer VS-1616D-MD User Manual Download Page 76

Page: 76 / 103

VS-1616D-MD - Technical Specifications

Technical Specifications

BANDWIDTH:

Supports up to 3.2Gbps bandwidth per channel (limited
by the cards installed)

MAX RESOLUTION:

Up to UXGA; 1080p

CONTROLS:

Front panel buttons, Infrared remote control transmitter,
RS-232, Ethernet

SWITCHING:

Confirm or At Once for immediate switching

POWER CONSUMPTION:

100-240V AC, 50/60Hz, 135VA

OPERATING TEMPERATURE:

0° to +50°C (32° to 122°F)

STORAGE TEMPERATURE:

–45° to +72°C (–49° to 162°F)

HUMIDITY:

10% to 90%, RHL non-condensing

COOLING:

Forced air, fan

ENCLOSURE TYPE:

Aluminium

RACK MOUNT:

With supplied rack “ears”

DIMENSIONS:

19” 4U (47.5cm x 37cm x 18cm W, D, H)

PRODUCT WEIGHT:

7.45kg (16.42lbs) approx.

SHIPPING WEIGHT:

8.75kg (19.29lbs) approx.

VIBRATION:

ISTA 1A in carton (International Safe Transit
Association)

SAFETY REGULATORY
COMPLIANCE:

CE, FCC

MTBF:

10 years

ENVIRONMENTAL
REGULATORY COMPLIANCE:

Complies with appropriate requirements of RoHs and
WEEE

INCLUDED

ACCESSORIES:

Power cord, Infrared remote control transmitter

Specifications are subject to change without notice at

http://www.kramerelectronics.com

The following table lists the technical specifications of the cards that are

compatible with the

VS-1616D-MD

chassis.

Summary of Contents for VS-1616D-MD








































































































Search results

Summary of Contents for VS-1616D-MD

Reviews:

Related manuals for VS-1616D-MD

Brands by name

Popular brands

Kramer VS-1616D-MD, User Manual

Search results

Summary of Contents for VS-1616D-MD

Reviews:

Related manuals for VS-1616D-MD

Brands by name

Popular brands