Connecting the VP-81SID 8x1 Digital STEP-IN Switcher
13
13
Table 3: Remote Contact Terminal Block Connections
Terminal
Number
Description
1
Connect to ground to select input 1
2
Connect to ground to select input 2
3
Connect to ground to select input 3
4
Connect to ground to select input 4
5
Connect to ground to select input 5
6
Connect to ground to select input 6
7
Connect to ground to select input 7
8
Connect to ground to select input 8
9
Connect to ground to select input 9
10
Connect to ground to select input 10
11
Connect to ground to toggle between output 1 and output 2
G
Ground
The following example (see
Figure 5
) illustrates three switches (1, 8 and A)
connected so as to remotely control inputs 1 and 8, and select an output
respectively. Connected as shown, pressing switch 1 causes input 1 on the
VP-81SID
to be the active input, and pressing switch 8 causes input 8 to be the
active input. Pressing switch A causes the output selection to toggle between the
TP and HDMI outputs.
Figure 5: Remote Input Selection Switch Wiring
To connect remote input/output selection switches as illustrated in the
example in
Figure 5
:
1. Connect Switch 1 to pins 1 and G on the terminal block (remote step-in for
input 1).
2. Connect Switch 8 to pins 8 and G on the terminal block (remote step-in for
input 8).
3. Connect Switch A to pins 11 and G on the terminal block (remote output
selection toggle).
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203