KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-81SID 8x1 Digital STEP-IN Switcher
16
Figure 7: Control of Multiple VP-81SID Devices via RS-232 and RS-485
6.5 Connecting to the VP-81SID via the Ethernet Port
You can connect the
VP-81SID
via Ethernet in the following ways:
•
For direct connection to the PC, use a crossover cable (see
Section 6.5.1
)
•
For connection via a network hub or network router, use a straight through
cable (see
Section 6.5.2
)
Note:
The following instructions are valid only if your PC uses a fixed IP address.
If your PC receives an IP address from a DHCP server, consult your IT department
regarding a suitable IP address.
6.5.1 Connecting Directly to the Ethernet Port
You can connect the Ethernet port of the
VP-81SID
to the Ethernet port on your
PC via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory
default IP address of the
VP-81SID
during the initial configuration
To connect the VP-81SID directly to a PC:
1. Using a crossover cable, connect the
VP-81SID
to the PC via the Ethernet
port on both units.
2. On the PC, click
Start
>
Control Panel.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
