KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-81SID Remotely
28
2. Click
OK
.
The device is reset.
8.1.13 Setting the IP Network Parameters
To set the IP network parameters you must be logged in as Admin.
To set the IP network parameters:
1. Click
Unit
>
Device Details
.
2. Under
Connectivity
, edit the required parameter.
3. Click
Set Value
.
A confirmation message appears.
4. Click
OK
.
The parameter is set.
5. Reset the device (see
Section 8.1.13
).
8.1.14 Setting Multiple Cascaded Devices
You can control up to four devices via a single RS-232 or Ethernet connection
using the Step-In Software. Control of multiple devices is the same as for a single
device but you must first set the number of devices. The main window (see
Figure 10
) then displays an extra column of input buttons for each device.
The number of devices can be set manually or automatically. We recommend that
you set the number of devices manually as the auto-scanning procedure can take
some time.
To set the number of devices:
1. From the menu bar, click
Unit
.
2. From the options, click
Cascade
.
3. Either:
Manually select the number of devices
OR
Select
Auto.
The Step-In Software scans the RS-485 bus for active devices. This may
take a few minutes
8.1.15 Changing the Admin Password
By default, there is no Admin password. To change the Admin password, use the
embedded Web pages (see
Section 9.5
). You can only change the Admin password
if you are logged in as Admin.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
