Defining the VP-81SID 8x1 Digital STEP-IN Switcher
7
Figure 2
and
Table 2
define the rear panel of the
VP-81SID
8x1 Digital STEP-IN Switcher.
Figure 2: VP-81SID 8x1 Digital STEP-IN Switcher Rear Panel
Table 2: VP-81SID 8x1 Digital STEP-IN Switcher Rear Panel Features
#
Feature
Function
1
TP Input RJ-45 Connectors
IN 1
to
IN 8
Connect to the remote TP sources (1 to 8) using CAT 6 or higher specification cable.
These may be step-in panels (for example, SID-DP) or TP transmitters (for example, the
PT-571 or TP-573)
2
LOCAL INPUTS
DVI
Connect to the local DVI source
3
HDMI
Connect to the local HDMI source
4
TP OUT
RJ-45 Connector
Connect to the remote TP receiver, for example, PT-572+, using CAT 6 or higher
specification cable (maximum 50m, 164ft)
5
USB POWER
Connector
Connect any device requiring USB power, (for example, the Kramer KW-11T)
6
RS-232
9-pin D-sub Port (F)
Connect to a serial controller (see
Section 6.3
)
7
REMOTE
12-way Terminal Block
Connect to remote contact closure input and output selection switches (see
Section 6.2
)
8
ETHERNET
RJ-45 Connector
Connect to a PC or LAN for remote control via Ethernet (see
Section 6.5
)
9
AC Mains Power Socket
Connect to the AC mains power
10
AC Mains Fuse
AC mains supply protection fuse
11
AC Mains Power Switch
Turns the AC mains power supply to the device on and off
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
