Protocol 3000 Syntax
49
49
14.12.10 RESET
Command Name
Short Cmd
Command Type
Permission
RESET
Common-mandatory
Administrator
Reset device
Syntax
#
RESET
␍
Response
~nn@
RESET
␠
OK
␍␊
Parameters
Notes
If device connected by USB, it’s recommend to disconnect the connection immediately after operating this command, to
eliminate port locking because USB bug in windows (if port was locked anyway, disconnect and reconnect the cable and then
try to open port again).
14.12.11 LDFW
Command Name
Short Cmd
Command Type
Permission
LDFW
Common - Packets
Admin
Load new Firmware file
Syntax
Step 1: #
LDFW
␠
size
␍
Response 1:
~nn@
LDFW
␠
size
␠
READY
␍␊
or ~nn@
LDFW
␠
ERRnn
␍␊
Step 2: If
ready
was received, send
FIRMWARE_DATA
P
Response 2:
~nn@
LDFW
␠
size
␠
OK
␍␊
Parameters
size
–Size of firmware data that will send.
FIRMWARE_DATA
- HEX or KFW file in protocol packets (Apendix A)
Notes
In most devices firmware data will saved to device flash memory, but device will not update until receiving command
“UPGRADE” and restart.
P
Protocol Packet reference: Appendix A.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203