VP-773AMP - The OSD Menu
27
27
6.3
The Audio Menu
Figure 19: Audio Menu
Setting
Function
Volume
Set the input/output volume level [dB], see
Figure 20
E
. Set the:
Input Volume
[
dB
]
– to adjust the audio input level
Output Volume
[
dB
]
– to adjust the audio output level
The maximum output volume can be pre-limited via the Web pages (see
Section
9.6.2
). When setting the volume level, once the slider reaches the maximum
defined by the pre-
limiter, a “Volume is pre-limited” message appears on screen.
The output audio level can also be set via the + and
– buttons on the front panel
buttons (when not in the OSD mode) and/or the IR remote control transmitter buttons
(see
Section
8.4
)
Note that when set to MUTE (see
Section
6.8
), changing the output level unmutes the
audio signal.
Mic1 Volume
[
dB
]
– to adjust the Microphone 1 audio level
Mic2 Volume
[
dB
]
– to adjust the Microphone 2 audio level
Balance
Set the balance [ratio]
E
Treble
Set the treble [dB]
E
Bass
Set the bass level [dB]
E
Mic Effects
For Mic 1, set the:
Mic1 Talkover Depth
[
%
]
– to determine the decrease of the audio level during
microphone 1 takeover (press + to further decrease the talkover audio output
level; press
– to lessen the talkover output audio decrease level)
E
Mic1 Talkover Trigger
[dB]
– to determine the microphone 1 threshold level
that triggers the audio output-level decrease
E
Mic1 Mix
[dB]
– set to 1 to enable the Talkover mode or set to any other value
to decrease the Mic1 volume without changing the Line out and Mic2 volume
levels.
In the Mix mode, set the:
Line Mix
[dB]
– to decrease of the line out volume level without changing the
Mic 1 and Mic 2 volume levels
Summary of Contents for VP-773AMP
Page 2: ......
Page 3: ......
Page 64: ...58 VP 773AMP Using the Embedded Web Pages Figure 40 The Routing Scaling Page PIP Window...
Page 118: ......