![background image](http://html1.mh-extra.com/html/kramer/vp-773amp/vp-773amp_user-manual_2001765067.webp)
VP-773AMP - Using the Embedded Web Pages
61
61
9.1.3
Auto Switching
Click the Auto Switching button to open the Auto Switching window (see
Figure 44
).
The Auto Switching window lets you set the Main and PiP scanning mode
separately to:
Off
to disable scanning
Scan
mode to scan through the inputs in search of a valid input signal.
In the scan mode you can select which of the inputs will be included in the
scan (see
Figure 45
) and also change the order of the scanned inputs (see
Figure 46
)
Last Connected
mode to immediately switch to the latest valid input signal
connected (for HDMI and DP inputs only)
Note that in case the last connected valid input signal is disconnected, the
VP-773AMP
will switch to the previous last-connected valid-input signal, and
then to the input before that and so on until the last disconnected inputs, and
then a
“No Signal” screen will appear
Figure 44: The Routing & Scaling Page
–
Auto Switching Window (Main Tab)
Figure 45: The Routing & Scaling Page
–
selecting the Inputs to Scan (PiP Tab)
Summary of Contents for VP-773AMP
Page 2: ......
Page 3: ......
Page 64: ...58 VP 773AMP Using the Embedded Web Pages Figure 40 The Routing Scaling Page PIP Window...
Page 118: ......