36
VP-773AMP - The OSD Menu
Setting
Function
Advanced
(continued)
Auto Sync Off
– to turn the auto sync On/Off.
When ON, 2 minutes after not detecting a valid video signal on the selected
input (or both inputs in the dual window mode), the unit will disable the syncs
and the audio on all the outputs, until a valid input is again detected or any
keypad button is pressed to activate the machine (once restored, the buttons
return to their normal function)
E
When using the
VP-773AMP
for audio only, we recommend
that you turn this feature off
Luma Keying
– to turn the keying on the PiP window ON or OFF (see
Section
6.8.1
)
E
Alert System
–
to
set the Alert system On or Off (see
Section
6.8.2
)
E
No Signal
– to set the color of the windows if no signal is detected. Select
Gray, Blue or Black
M
/
P
If gray or blue is selected, the Main window color is light while PIP has a darker
shade. When black is selected, both windows appear black
Auto Switching
– to set auto switching to Off, Scan mode or Last
Connected mode separately for the Main window and the PiP window.
Set to Scan to scan through the inputs in search of a valid input signal.
Set to Last Connected to immediately switch to the latest valid input signal
connected (for HDMI and DP inputs only).
Note that in case the last connected valid input signal is disconnected, the
VP-773AMP
will switch to the previous last-connected valid-input signal, and
then to the input before that and so on until the last disconnected inputs, and
then a “No Signal” screen will appear
Set to Off to disable scanning
M
/
P
Note that by default the highest priority input on the list is HDMI1 and the
lowest is DP (according to the order of the input front panel buttons). In the
scan mode you can select which of the inputs will be included in the scan
and also change the order of the scanned inputs (the priority list), via the
Web pages only, see
Section
9.1.3
Pause
Set:
Freeze
– to ON to freeze the window (freezing the main window will also
mute the audio output)
M
/
P
Blank
– to ON to display a blank window (blanking the main window will also
mute the audio output)
M
/
P
Note that any change in the input source may cancel the freeze
and blank settings.
Mute
– to ON to mute the audio output
E
A mute/unmute icon appears on screen according the state selected. Note that
MUTE is disabled once changing the volume level
Disable Outputs
– to turn the sync and audio On/Off.
When ON, the unit will disable the syncs and mute the audio output until any
keypad button is pressed
E
Once Disable Outputs is selected, a countdown appears, letting you cancel the
process and revert to the previous state
Protocol
Set the communication protocol to P3K or Legacy (see
Section
13
)
E
When setting the Protocol to Legacy, some PC applications (for
example, K-Upload) as well as the Web pages may not function
properly.
i
i
i
Summary of Contents for VP-773AMP
Page 2: ......
Page 3: ......
Page 64: ...58 VP 773AMP Using the Embedded Web Pages Figure 40 The Routing Scaling Page PIP Window...
Page 118: ......