VP-773AMP - Connecting the VP-773AMP
13
13
6. Connect the HDMI 1 OUT connector to an HDMI acceptor (for example, an
LCD display).
You can also connect the HDMI OUT 2 output (not shown in
Figure 4
)
7. Connect the HDBT RJ-45 connector to a receiver (for example, the Kramer
TP-580Rxr)
.
8. Connect the AUDIO LINE OUT Terminal Block connector to a balanced
audio acceptor and the S/PDIF OUT RCA connector to a digital audio
acceptor (not shown in
Figure 4
).
9. Connect the SPKR OUT block connector to a pair of loudspeakers, by
connecting the left loudspeaker to the “L+” and the “L-” terminal block
connectors, and the right loudspeaker to the “R+” and the “R-” terminal block
connectors.
Do not Ground the loudspeakers
.
10. If required, you can connect a PC and/or controller to the:
RS-232 terminal block (see
Section
8.3.2
)
Ethernet connector (see
Section
8.3.3
)
11. Connect the power cord (not shown in
Figure 4
).
Summary of Contents for VP-773AMP
Page 2: ......
Page 3: ......
Page 64: ...58 VP 773AMP Using the Embedded Web Pages Figure 40 The Routing Scaling Page PIP Window...
Page 118: ......