![background image](http://html1.mh-extra.com/html/kramer/vp-773amp/vp-773amp_user-manual_2001765057.webp)
VP-773AMP - Controlling the VP-773AMP
51
51
6. Select
Use the following IP Address
for static IP addressing and fill in the
details as shown in
Figure 33
.
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39) that is provided by your IT
department.
Figure 33: Internet Protocol Properties Window
7. Click
OK
.
8. Click
Close
.
8.3.3.2 Connecting the ETHERNET Port via a Network Hub or Switch
You can connect the Ethernet port of the
VP-773AMP
to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45 connectors.
8.3.3.3 Ethernet Port Configuration and Control
Use the Kramer K-UPLOAD software to configure the
VP-773AMP
and the Web
pages to control it via the Ethernet.
The latest version of K-UPLOAD and installation instructions can be
downloaded from the Kramer Web site at
http://www.kramerelectronics.com/support/product_downloads.asp
i
Summary of Contents for VP-773AMP
Page 2: ......
Page 3: ......
Page 64: ...58 VP 773AMP Using the Embedded Web Pages Figure 40 The Routing Scaling Page PIP Window...
Page 118: ......