![background image](http://html1.mh-extra.com/html/kramer/vp-773amp/vp-773amp_user-manual_2001765053.webp)
VP-773AMP - Controlling the VP-773AMP
47
47
8.3
Controlling via the VP-773AMP Web Pages
The Web pages are described in detail in
Section
9
. You can remotely operate the
VP-773AMP
using a Web browser via the Ethernet connection (see
Section
8.3.3
).
To be able to do so, you must use a supported Web browser:
For Windows 7 and higher
:
Chrome version 35
Internet Explorer (32/64 bits) version 10
Firefox version 30
For Mac (PC)
:
Chrome version 35
Safari 7
Firefox version 27
For iOS
:
Chrome version 35
Safari 7
For Android OS
:
Chrome version 35
Safari 7
8.3.1
Connecting to the VP-773AMP via your Browser
Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see
Section
6.8
), the Web pages may not function properly.
Make sure that your PC is connected via a network to the
VP-773AMP
and do the
following:
1. Open your Internet browser.
2.
Enter the unit’s IP number or name in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
The default IP number is 192.168.1.39, and may be changed by the system
integrator
Figure 29: Entering the IP Number in the Address Bar
You can now control the machine via the Web page.
i
Summary of Contents for VP-773AMP
Page 2: ......
Page 3: ......
Page 64: ...58 VP 773AMP Using the Embedded Web Pages Figure 40 The Routing Scaling Page PIP Window...
Page 118: ......