28
VP-733 - Configuring the VP-733 via the OSD MENU Screens
Setting
Function
Default
Positioning
Set H_Start, H_End, H_Position, H_Size, V_Start,
V_End, V_Position, V_Size
Note that positioning is disabled when custom or native
resolutions are selected
Available in the follow output mode and 100% zoom
Preview
Define the preview settings:
Resolution
Single Picture, 640x480x60Hz, 640x480x75Hz,
800x600x50Hz, 800x600x60Hz, 800x600x75Hz,
1024x768x50Hz, 1024x768x60Hz, 1024x768x75Hz,
1280x768x50Hz, 1280x768x60Hz, 1280x720x60Hz,
1280x800x60Hz, 1280x1024x50Hz, 1280x1024x60Hz,
1280x1024x75Hz, 480px60Hz, 576px50Hz, 720px50Hz,
720px60Hz, 480px59.94Hz, 720px59.94Hz, Custom 1 to
Custom 4
Single
Picture
Setting the Preview resolution to Single Picture means
that the PREVIEW mode is disabled.
In the PIP mode the preview resolution will automatically
be set to Single Picture and when changing it to a
different resolution, a message will appear to confirm that
PIP will be closed.
Aspect
Ratio
Set the aspect ratio (also see
Section 7.3.1
Best Fit
Letterbox
Follow Output
– If input resolution ≤ output resolution it
scales up picture and fills the display (with warp); if input
resolution ≥ than output resolution, scales down the
picture and fills the display (with warp)
Virtual Wide
Follow Input
– If input resolution ≤ output resolution,
displays with a blank border. If the input resolution ≥
output resolution, crops the image
Custom
– Click to enable custom aspect ratio
Custom Aspect Ratio
– Set H-Pan, V-Pan, H-Zoom and
V-Zoom
Zoom
Zoom the image up to 400% or select custom and use
Zoom H-Pan and Zoom V-Pan to set a custom image
size
100%
Positioning
Set H_Start, H_End, H_Position, H_Size, V_Start,
V_End, V_Position, V_Size
Note that positioning is disabled when custom or single
picture resolutions are selected
Available in the follow output mode and 100% zoom
HDMI1
Select the output for HDMI 1 to Follow Program or Follow Preview
Follow
Program
HDMI1
Type
Set the HDMI1 output type to Auto, HDMI or DVI
Auto
HDMI2
Type
Set the HDMI 2 output type to Auto, HDMI or DVI
Test
Pattern
Set the test pattern to Colorbar, SMPTE, Greyscale, Picture Border,
Multiburst, Ramps, H-pattern, Setup, or set to Off
Off