VP-733
–
Presentation Switcher / Scaler Buttons
23
6.5
The Infrared Remote Control Transmitter
You can control the
VP-733
remotely from the infrared remote control transmitter
which is powered by two AAA size 1.5V DC batteries. The IR remote control
transmitter has a range of up to 15 meters and delivers instantaneous results.
Figure 12: IR Remote
Control Transmitter
Key
Function
Prev
Toggle between the Preview/PIP modes
POWER
Toggle the
VP-733
ON or OFF (standby)
Save
Press to save a profile
Recall
Press to recall a profile
Logo
Press to display the logo
Info
Press to toggle the Info OSD menu
PROG Source
12 keys for selecting one of the following PROG
sources: HDMI 1, HDMI 2, HDMI 3, HDMI 4, UNIV
1, UNIV 2, UNIV 3, UNIV 4, DP 1, DP 2 HDBT 1
and HDBT 2
PROG Freeze
Pauses the PROGRAM output video and can be
programmed to mute the audio signal at the same
time (see
Section 7.6.3
PROG Blank
Toggles between a PROGRAM blank screen (blue
or black) and the display
PROG Mute
Press to mute the PROGRAM audio signal
MENU
Shows the main OSD Menu
Navigation
arrows
Allows maneuvering within an OSD screen (left,
right, up and down, as well as the ENTER arrow at
the center)
Reset
Press and hold to reset to the default resolution
(toggles between RESET TO XGA and 720p)
Auto Image
Press to assess the image and improve the quality
accordingly, by automatically adjusting the phase,
frequency and position
Picture
Press to display the Picture OSD menu
Audio
Press to display the Audio OSD menu
PIP/Preview
Freeze
Pauses the Preview output video and can be
programmed to mute the audio signal at the same
time (see
Section 7.6.3
PIP/Preview
Blank
Toggles between a Preview blank screen (blue or
black) and the display
PIP/Preview
source
12 keys for selecting one of the following
PIP/Preview sources: HDMI 1, HDMI 2, HDMI 3,
HDMI 4, UNIV 1, UNIV 2, UNIV 3, UNIV 4, DP 1,
DP 2 HDBT 1 and HDBT 2
PIP/Preview
Mute
Press to mute the PREVIEW audio signal