48
VP-733 - Using the Embedded Web Pages
Figure 31: The Routing & Scaling Page
– Selecting the output Resolution
The Preview tab shows the list of resolutions available for the Preview
output (including Single Picture to set the PIP mode, see
Section 7.3
9.2.6
Swapping Inputs
Press the Swap
Inputs
button to swap between MAIN and PIP inputs (in the PIP
mode). For example, if the MAIN window displays HDMI 3 and the PIP window
displays HDMI 1, these inputs swap places when clicking the Swap Inputs button,
so the MAIN window will now show HDMI 1 and the PIP window will show HDMI 3.
Figure 32: The Routing & Scaling Page
– The Swap Inputs
9.2.7
The Lower Buttons Bar
The lower buttons bar lets you perform quick and easy setups:
Figure 33: The Routing & Scaling Page
– Program Lower Buttons Bar
