![background image](http://html1.mh-extra.com/html/kramer/vp-733/vp-733_user-manual_2002254046.webp)
38
VP-733 - Configuring the VP-733 via the OSD MENU Screens
7.6.5
The Output Functions Screen
The following table defines the output settings:
Setting
Function
Default
Custom Output
Custom 1 to Custom 4
HT
Horizontal total
1344
HW
Horizontal sync pulse width
136
HS
Horizontal active start point
296
HA
Horizontal active region
1024
HP
Horizontal polarity
VT
Vertical total
806
VW
Vertical sync pulse width
6
VS
Vertical active start point
35
VA
Vertical active region
768
VP
Vertical polarity
OCLK
Output clock
65
Save
Save setup
Get Current
Import the values of the currently selected output
resolution into the User Mode Setting
Read HDMI1 EDID
Reads the EDID file from the acceptor that is
connected to the HDMI 1 output. The EDID is stored
as a custom output resolution.
This allows, for example, automatic handling of LED
screens that support very low non-standard
resolutions
N/A
Read HDMI2 EDID
Reads the EDID file from the acceptor that is
connected to the HDMI 2 output. The EDID is stored
as a custom output resolution.
This allows, for example, automatic handling of LED
screens that support very low non-standard
resolutions
N/A
Read DP EDID
Reads the EDID file from the acceptor that is
connected to the DP output. The EDID is stored as a
custom output resolution.
This allows, for example, automatic handling of LED
screens that support very low non-standard
resolutions
N/A
Read VGA EDID
Reads the EDID file from the acceptor that is
connected to the VGA output. The EDID is stored as
a custom output resolution.
This allows, for example, automatic handling of LED
screens that support very low non-standard
resolutions
N/A