![background image](http://html1.mh-extra.com/html/kramer/vp-725dsa/vp-725dsa_user-manual_2002239019.webp)
Connecting the VP-725DSA Presentation Switcher / Scaler
13
2. Connect one or more of the following balanced stereo audio sources (not
illustrated in Figure 3). In particular, the audio of:
VGA Sources 1, 2, 3 and 4 to the AUDIO input terminal block
connectors VGA 1, VGA 2, VGA 3, and VGA 4, respectively
CV Sources 1, 2, 3 and 4 to the AUDIO input terminal block
connectors CV 1, CV 2, CV 3, and CV 4, respectively
YC Sources 1, 2, 3 and 4 to the AUDIO input terminal block
connectors YC 1, YC 2, YC 3, and YC 4, respectively
Component video/ RGB Sources 1, 2, 3 and 4 to the AUDIO input
terminal block connectors COMP 1, COMP 2, COMP 3, and COMP
4, respectively
DVI Sources 1 and 2 to the AUDIO input terminal block connectors
DVI 1 and DVI 2, respectively
3. Connect a microphone to the Mic IN XLR connector
1
, and push in or
release the Con / Dyn Switch as appropriate (see item 12 in Table 2).
4. Connect the CV OUT BNC connector, the YC OUT 4p connector, and the
VGA OUT HD15 connector to the respective video inputs on the projector.
Connect the MASTER OUT terminal block connector to the balanced audio
input on the audio amplifier. Select any one of the three audio inputs to route
to the MASTER OUT
1
(see the example in section 6.1.1).
5. Connect the COMP OUTPUT BNC connectors: G/Y, B/Pb, and R/Pr to
the respective component video inputs on the Plasma monitor.
6. Connect up to three SCALED OUTPUTS, as follows:
Connect the RGBHV connectors (G/Y, B/Pb, R/Pr, H, and V) to the
RGBHV acceptor, for example, a Plasma monitor
Connect the DVI connector to the DVI acceptor, for example, a projector
Connect the VGA connector to the VGA acceptor, for example, a monitor
7. Connect the MASTER OUT terminal block connector to the balanced
audio input on the audio amplifier, and route the audio input
(corresponding to the converted video input) to the MASTER OUT
1
(see
the example in section 6.1.2).
8. Connect the power cord
2
(not illustrated in Figure 3).
9. Connect a PC (optional), see section 6.2.
10. Connect the Ethernet port (optional), see section 6.4.
1 Not illustrated in Figure 3
2 We recommend that you use only the power cord that is supplied with this machine