Controlling the VP-725DSA Presentation Switcher / Scaler
53
9.2 Operating via the LCD Display
You can control the
VP-725DSA
from the front panel high contrast LCD
Display. You can also operate the
VP-725DSA
via the LCD Display, using
the:
Front panel OSD buttons:
MENU
,
ENTER
,
-
,
+
,
UP
and
DOWN
Infra-red remote control transmitter (see Figure 55) keys: MENU, and the
navigation keys
For example, to set
1
the Keystone to 6 via the LCD Display, using the front
panel buttons, do the following:
1. Turn the
VP-725DSA
unit ON, and press the OSD ON button (if
selected).
2. Press the appropriate front panel OSD buttons (as defined in Figure 54).
Figure 54: Example of how to use the LCD Display
9.3 Operating via the Infra-red Remote Control Transmitter
You can control the
VP-725DSA
remotely, from the infra-red remote control
transmitter (that has a range of up to 15 meters and is powered by two AAA
size 1.5V DC batteries), as defined in Figure 55 and Table 21:
1 To keep the picture rectangular. Figure 34 illustrates how to adjust the Keystone via the OSD Menu
