VP-553 - The VP-553 RS-232 Communication Protocol
67
67
Command
–
LOCK-FP
Command Type
– System
Command Name
Permission
Transparency
Set:
LOCK-FP
End User
-
Get:
LOCK-FP?
End User
-
Description
Syntax
Set:
Lock front panel
#
LOCK-FP
␠
P1
␍
Get :
Get front panel lock state
#
LOCK-FP?
␍
Response
nn@
LOCK-FP
␠
P1
␠
OK
␍␊
Parameters
P1 (Off/On)
– 0=Off; 1=On
Command
–
HDCP-MOD
Command Type
– System
Command Name
Permission
Transparency
Set:
HDCP-MOD
Administrator
Public
Get:
HDCP-MOD?
End User
Public
Description
Syntax
Set:
Set HDCP mode
#
HDCP-MOD
␠
P1,P2,P3
␍
Get :
Get HDCP mode
#
HDCP-MOD?
␠
P1,P2
␍
Response
Set / Get : ~
nn
@
HDCP-MOD
␠
P1,P2,P3
␍␊
Parameters
P1 (Input/Output)
– 0=Input; 1=Output
P2 (Scaler number)
– 1=Scaler1; 2=Scaler2
P3 (Status)
– 0=Off; 1=On; 2=Follow In, 3=Follow Out
Response triggers
Response is sent to the com port from which the
Set
(before execution)
/ Get
command was
received
Response is sent to all com ports after execution if HDCP-MOD was set any other external control
device (button press, device menu and similar) or genlock status changed
Notes
Set HDCP working mode
on device input
:
HDCP supported
– HDCP_ON [default]
HDCP not supported
– HDCP OFF
HDCP support changes following detected sink
– MIRROR OUTPUT
