VP-553 - The VP-553 RS-232 Communication Protocol
63
63
Command
–
NET-MASK
Command Type
– Communication
Command Name
Permission
Transparency
Set:
NET-MASK
Administrator
-
Get:
NET-MASK?
End User
-
Description
Syntax
Set:
Set device subnet mask
#
NET-MASK
␠
net_mask
␍
Get :
Get device subnet mask
#NET-MASK?
␍
Response
Set: ~
nn
@
NET-MASK
␠
P1
␠
OK
␍␊
Get: ~
nn
@
NET-MASK
␠
net_mask
␍␊
Parameters
P1 (valid IP address)=xxx.xxx.xxx.xxx
Response triggers
The subnet mask limits the Ethernet connection within the local network.
For proper settings consult your network administrator.
Command
–
NET-DHCP
Command Type
– Communication
Command Name
Permission
Transparency
Set:
NET-DHCP
Administrator
-
Get:
NET-DHCP?
End User
-
Description
Syntax
Set:
Set DHCP mode
#
NET-DHCP
␠
P1
␍
Get :
Get DHCP mode
#NET-DHCP?
␍
Response
Set: ~
nn
@
NET-DHCP
␠
P1
␠
OK
␍␊
Get: ~
nn
@
NET-DHCP
␠
mode
␍␊
Parameters
P1 (Off/On)
– 0=off; 1=on
0
– Do not use DHCP. Use the IP set by the factory or using the IP set command.
1
– Try to use DHCP. If unavailable, use IP as above.
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks.
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port
if available.
For proper settings consult your network administrator.
