![background image](http://html.mh-extra.com/html/kramer/kt-107s/kt-107s_user-manual_2002364032.webp)
Kramer Electronics Ltd.
KT
‑
107S
– Upgrading the Firmware
30
Prepare the KT
‑
107S for Firmware Upgrade
To prepare the KT
‑
107S:
1. Verify that the battery is at least 70% charged.
2. Disconnect the panel from its mount (see
Mounting the KT
‑
107S
on page
8
).
3. Power-off the panel (from the Power button
or via the Kramer control button
on
the front of the
Touch Panel
).
4. Connect the PC USB port directly to the micro-USB port
on the rear of the
KT
‑
107S
(do not use the port on the mount) via a USB cable with data-transfer-
capabilities (supplied with the unit).
You can connect up to 8
Touch Panel devices
to upgrade simultaneously.
Carefully place the
KT
‑
107S
in a way that does not cause damage to the USB cable or port.
Upgrade the Firmware via PC
To upgrade the firmware
:
1.
In the ‘KT FW Upgrade Tool’ folder, double-click ‘Kramer Touch Panel FW Upgrade
Tool.exe’.
The FW Upgrade Tool window appears:
Figure 35: Firmware Upgrade Tool