manualshive.com logo in svg

Kramer KT-107S, User Manual, Page: 36 / 38

Share
Download
Kramer KT-107S User Manual Download Page 36

Kramer Electronics Ltd. 

 

KT

‑

107S 

– Technical Specifications 

34 

 

Technical Specifications 

Tabletop Mount Ports 

1 1000/100/10BaseT Ethernet on RJ-45 connector 
1 micro USB 2.0 
1 2-pin terminal block for DC power supply 

On-wall Mount Ports 

1 1000/100/10BaseT Ethernet on RJ-45 connector 
1 2-pin terminal block for DC power supply 

Speakers 

2x1-W, 8 ohm 

CPU Performance 

1.6GHz Quad Core, GPU, 2GB RAM, 16GB Flash 

OS Software 

Android 6.0.1 

Multi Touch 

10 points, 2-finger gesture 

Display 

7” IPS, 1280x800 RGB pixels, 16:10 aspect ratio, ±85° horizontal/vertical 
viewing angles, 400cd/m2 brightness, 800:1 contrast ratio 

Video Decoding Format 

HEVC/H.265, H.264, H.263, MPEG

–1/2/4, VC–1, VP6/8, RV8/9/10, AVS, 

MVC, Sorenson Spark, M

–JPEG 

Video Encoding Format 

H.264/AVC 

Ethernet Port 

Auto-sensing 10/100/1000Mbps PoE LAN  

Battery 

Rechargeable, supports up to 3 hours of Wi-Fi operation 

Controls 

Hidden reset button, power button, firmware-upgrade button 

Touch Panel Status LED 

Flashes green during charging, steady green for fully charged 

Power Inputs 

Power over Ethernet (complies with IEEE802.3af and IEEE802.3at PoE 
standards), power supply unit 

Power Consumption 

5V DC, 3A 

Operating Temperature 

0° to +40°C (32° to 104°F) 

Storage Temperature 

-10° to +55°C (14° to 131°F)  

Humidity 

10% to 90%, RHL non-condensing 

Case Design 

Black body and cover 

Certifications 

CE/CB, FCC, ROHS, REACH 

Dimensions 

Shipping dimensions:22.4cm x 13cm x 20.6cm (8.8" x 5.12" x 8.1"), W, D, H 
Touch panel: 17.8cm x 1.3cm x 13cm (7" x 0.51" x 5.12"), W, D, H 
Tabletop mount: 18.5cm x 10.7cm x 12.4cm (7.28" x 4.2" x 4.88"), W, D, H 
Panel mount plate: 14.6cm x 3.7cm x 9.2cm (5.75" x 1.46" x 3.62"), W, D, H 
On-wall mount unit: 14.6cm x 1.1cm x 9.1cm (5.75" x 0.43" x 3.58"), W, D, H 

Weight 

Shipping weight: 1.8kg (3.97lbs) approx. 
Touch panel: 0.37kg (0.8lbs) approx. 

Mounting Options 

Table top (with mount unit), on-wall (with mount unit and panel mount plate) 

Included Accessories 

Power supply unit adapter (5V, 4.0A AC/DC), tabletop mount, on-wall mount 
unit, panel-mount plate, right-angle OTG USB cable, C-USB/MicroB-6, and 
installation screws 

Specifications are subject to change without notice at 

www.kramerav.com

 

 

 

Summary of Contents for KT-107S







































Reviews:

No comments