![background image](http://html.mh-extra.com/html/kramer/kt-107s/kt-107s_user-manual_2002364014.webp)
Kramer Electronics Ltd.
KT
‑
107S
– Mounting the KT
‑
107S
12
7. Connect the Ethernet and micro-USB cables by either passing the cables from
underneath the table via the cable opening (see
Preparing the Table for a Secure Mount
on page
8
), or by placing them over the table.
8. Replace the appropriate cover (for under-the-table or over-the-table installation).
Figure 9: Replace the Cover
9. Optionally, lock the tabletop mount
with a Kensington locker (not supplied).
Mounting the KT
‑
107S on a Wall
KT
‑
107S
can be safely installed on a wall using standard 2-Gang in-wall junction boxes. The
cables are passed inside the wall and then connected to the rear side of the on-wall mount
unit.
We recommend that you use any of the following standard 2-Gang in-wall junction boxes:
•
USA
: 2-Gang electrical junction boxes.
•
Europe
: 2-Gang in-wall junction box, 47mm minimum depth (DIN 49073).
•
UK
: 2-Gang in-wall junction box, 137x75mm, 41mm minimum depth (BS 4662).
Other popular in-wall mounting boxes may also be available in the market (such as the
GEWISS 4 Gang 144x85x50mm box (GW 24 404)).