![background image](http://html.mh-extra.com/html/kramer/kt-107s/kt-107s_user-manual_2002364010.webp)
Kramer Electronics Ltd.
KT
‑
107S
– Mounting the KT
‑
107S
8
Mounting the KT
‑
107S
The
KT
‑
107S
can be placed on a table or mounted on a wall.
Always be careful when attaching or removing the
Touch Panel
from either mount.
Mounting the KT
‑
107S on a Table
•
Mount on a table using one of the following options:
•
Portable Mount
: Place the tabletop mount on the table. Connected cables remain
visible and the table remains intact.
•
Secure Mount
: Bolt the tabletop mount into the table. Connected cables are hidden
through a hole in the table.
Preparing the Table for a Secure Mount
To install the
KT
‑
107S
on a secure mount, go to
Installing KT
‑
107S on the Tabletop Mount
on page
11
.
To mount KT
‑
107S securely on a table, prepare the table as follows:
•
Drill a hole in the table to fit the M5x60 screw used for securing the tabletop mount to the
table.
•
Cut an opening in the table if you need to pass the cables from underneath.
The thickness of the table should be 76.2mm (3
”) or less.
Correctly measure the location of the M5x60 screw holes and the cable pass-through opening
using the cut-out template available on the Kramer website at
www.kramerav.com/downloads/KT
‑
107S
.
Figure 5: Cut-Out Dimensions (image not to scale)